站長資訊網函數名: cabs
功 能: 計算復數的絕對值
用 法: double cabs(struct complex z);
程序例:
#include <stdio.h>
#include <math.h>
int main(void)
{
struct complex z;
double val;
z.x = 2.0;
z.y = 1.0;
val = cabs(z);
printf(“The absolute value of %.2lfi %.2lfj is %.2lf”, z.x, z.y, val);
return 0;
}
函數名: calloc
功 能: 分配主存儲器
用 法: void *calloc(size_t nelem, size_t elsize);
程序例:
#include <stdio.h>
#include <alloc.h>
int main(void)
{
char *str = NULL;
/* allocate memory for string */
str = calloc(10, sizeof(char));
/* copy “Hello” into string */
strcpy(str, “Hello”);
/* display string */
printf(“String is %sn”, str);
/* free memory */
free(str);
return 0;
}
函數名: ceil
功 能: 向上舍入
用 法: double ceil(double x);
程序例:
#include <math.h>
#include <stdio.h>
int main(void)
{
double number = 123.54;
double down, up;
down = floor(number);
up = ceil(number);
printf(“original number %5.2lfn”, number);
printf(“number rounded down %5.2lfn”, down);
printf(“number rounded up %5.2lfn”, up);
return 0;
}
函數名: cgets
功 能: 從控制臺讀字符串
用 法: char *cgets(char *str);
程序例:
#include <stdio.h>
#include <conio.h>
int main(void)
{
char buffer[83];
char *p;
/* There’s space for 80 characters plus the NULL terminator */
buffer[0] = 81;
printf(“Input some chars:”);
p = cgets(buffer);
printf(“ncgets read %d characters: “%s”n”, buffer[1], p);
printf(“The returned pointer is %p, buffer[0] is at %pn”, p, &buffer);
/* Leave room for 5 characters plus the NULL terminator */
buffer[0] = 6;
printf(“Input some chars:”);
p = cgets(buffer);
printf(“ncgets read %d characters: “%s”n”, buffer[1], p);
printf(“The returned pointer is %p, buffer[0] is at %pn”, p, &buffer);
return 0;
}
函數名: chdir
功 能: 改變工作目錄
用 法: int chdir(const char *path);
程序例:
#include <stdio.h>
#include <stdlib.h>
#include <dir.h>
char old_dir[MAXDIR];
char new_dir[MAXDIR];
int main(void)
{
if (getcurdir(0, old_dir))
{
perror(“getcurdir()”);
exit(1);
}
printf(“Current directory is: \%sn”, old_dir);
if (chdir(“\”))
{
perror(“chdir()”);
exit(1);
}
if (getcurdir(0, new_dir))
{
perror(“getcurdir()”);
exit(1);
}
printf(“Current directory is now: \%sn”, new_dir);
printf(“nChanging back to orignal directory: \%sn”, old_dir);
if (chdir(old_dir))
{
perror(“chdir()”);
exit(1);
}
return 0;
}
函數名: _chmod, chmod
功 能: 改變文件的訪問方式
用 法: int chmod(const char *filename, int permiss);
程序例:
#include <sysstat.h>
#include <stdio.h>
#include <io.h>
void make_read_only(char *filename);
int main(void)
{
make_read_only(“NOTEXIST.FIL”);
make_read_only(“MYFILE.FIL”);
return 0;
}
void make_read_only(char *filename)
{
int stat;
stat = chmod(filename, S_IREAD);
if (stat)
printf(“Couldn’t make %s read-onlyn”, filename);
else
printf(“Made %s read-onlyn”, filename);
}
函數名: chsize
功 能: 改變文件大小
用 法: int chsize(int handle, long size);
程序例:
#include <string.h>
#include <fcntl.h>
#include <io.h>
int main(void)
{
int handle;
char buf[11] = “0123456789”;
/* create text file containing 10 bytes */
handle = open(“DUMMY.FIL”, O_CREAT);
write(handle, buf, strlen(buf));
/* truncate the file to 5 bytes in size */
chsize(handle, 5);
/* close the file */
close(handle);
return 0;
}
函數名: circle
功 能: 在給定半徑以(x, y)為圓心畫圓
用 法: void far circle(int x, int y, int radius);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int midx, midy;
int radius = 100;
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, “”);
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf(“Graphics error: %sn”, grapherrormsg(errorcode));
printf(“Press any key to halt:”);
getch();
exit(1); /* terminate with an error code */
}
midx = getmaxx() / 2;
midy = getmaxy() / 2;
setcolor(getmaxcolor());
/* draw the circle */
circle(midx, midy, radius);
/* clean up */
getch();
closegraph();
return 0;
}
函數名: cleardevice
功 能: 清除圖形屏幕
用 法: void far cleardevice(void);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int midx, midy;
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, “”);
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf(“Graphics error: %sn”, grapherrormsg(errorcode));
printf(“Press any key to halt:”);
getch();
exit(1); /* terminate with an error code */
}
midx = getmaxx() / 2;
midy = getmaxy() / 2;
setcolor(getmaxcolor());
/* for centering screen messages */
settextjustify(CENTER_TEXT, CENTER_TEXT);
/* output a message to the screen */
outtextxy(midx, midy, “press any key to clear the screen:”);
/* wait for a key */
getch();
/* clear the screen */
cleardevice();
/* output another message */
outtextxy(midx, midy, “press any key to quit:”);
/* clean up */
getch();
closegraph();
return 0;
}
函數名: clearerr
功 能: 復位錯誤標志
用 法:void clearerr(FILE *stream);
程序例:
#include <stdio.h>
int main(void)
{
FILE *fp;
char ch;
/* open a file for writing */
fp = fopen(“DUMMY.FIL”, “w”);
/* force an error condition by attempting to read */
ch = fgetc(fp);
printf(“%cn”,ch);
if (ferror(fp))
{
/* display an error message */
printf(“Error reading from DUMMY.FILn”);
/* reset the error and EOF indicators */
clearerr(fp);
}
fclose(fp);
return 0;
}
函數名: clearviewport
功 能: 清除圖形視區
用 法: void far clearviewport(void);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
#define CLIP_ON 1 /* activates clipping in viewport */
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int ht;
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, “”);
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf(“Graphics error: %sn”, grapherrormsg(errorcode));
printf(“Press any key to halt:”);
getch();
exit(1); /* terminate with an error code */
}
setcolor(getmaxcolor());
ht = textheight(“W”);
/* message in default full-screen viewport */
outtextxy(0, 0, “* <– (0, 0) in default viewport”);
/* create a smaller viewport */
setviewport(50, 50, getmaxx()-50, getmaxy()-50, CLIP_ON);
/* display some messages */
outtextxy(0, 0, “* <– (0, 0) in smaller viewport”);
outtextxy(0, 2*ht, “Press any key to clear viewport:”);
/* wait for a key */
getch();
/* clear the viewport */
clearviewport();
/* output another message */
outtextxy(0, 0, “Press any key to quit:”);
/* clean up */
getch();
closegraph();
return 0;
}
函數名: _close, close
功 能: 關閉文件句柄
用 法: int close(int handle);
程序例:
#include <string.h>
#include <stdio.h>
#include <fcntl.h>
#include <io.h>
main()
{
int handle;
char buf[11] = “0123456789”;
/* create a file containing 10 bytes */
handle = open(“NEW.FIL”, O_CREAT);
if (handle > -1)
{
write(handle, buf, strlen(buf));
/* close the file */
close(handle);
}
else
{
printf(“Error opening filen”);
}
return 0;
}
函數名: clock
功 能: 確定處理器時間
用 法: clock_t clock(void);
程序例:
#include <time.h>
#include <stdio.h>
#include <dos.h>
int main(void)
{
clock_t start, end;
start = clock();
delay(2000);
end = clock();
printf(“The time was: %fn”, (end – start) / CLK_TCK);
return 0;
}
函數名: closegraph
功 能: 關閉圖形系統
用 法: void far closegraph(void);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int x, y;
/* initialize graphics mode */
initgraph(&gdriver, &gmode, “”);
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error
occurred */
{
printf(“Graphics error: %sn”, grapherrormsg(errorcode));
printf(“Press any key to halt:”);
getch();
exit(1); /* terminate with an error code */
}
x = getmaxx() / 2;
y = getmaxy() / 2;
/* output a message */
settextjustify(CENTER_TEXT, CENTER_TEXT);
outtextxy(x, y, “Press a key to close the graphics system:”);
/* wait for a key */
getch();
/* closes down the graphics system */
closegraph();
printf(“We’re now back in text mode.n”);
printf(“Press any key to halt:”);
getch();
return 0;
}
函數名: clreol
功 能: 在文本窗口中清除字符到行末
用 法: void clreol(void);
程序例:
#include <conio.h>
int main(void)
{
clrscr();
cprintf(“The function CLREOL clears all characters from thern”);
cprintf(“cursor position to the end of the line within thern”);
cprintf(“current text window, without moving the cursor.rn”);
cprintf(“Press any key to continue . . .”);
gotoxy(14, 4);
getch();
clreol();
getch();
return 0;
}
函數名: clrscr
功 能: 清除文本模式窗口
用 法: void clrscr(void);
程序例:
#include <conio.h>
int main(void)
{
int i;
clrscr();
for (i = 0; i < 20; i++)
cprintf(“%drn”, i);
cprintf(“rnPress any key to clear screen”);
getch();
clrscr();
cprintf(“The screen has been cleared!”);
getch();
return 0;
}
函數名: coreleft
功 能: 返回未使用內存的大小
用 法: unsigned coreleft(void);
程序例:
#include <stdio.h>
#include <alloc.h>
int main(void)
{
printf(“The difference between the highest allocated block andn”);
printf(“the top of the heap is: %lu bytesn”, (unsigned long) coreleft());
return 0;
}
函數名: cos
功 能: 余弦函數
用 法: double cos(double x);
程序例:
#include <stdio.h>
#include <math.h>
int main(void)
{
double result;
double x = 0.5;
result = cos(x);
printf(“The cosine of %lf is %lfn”, x, result);
return 0;
}
函數名: cosh
功 能: 雙曲余弦函數
用 法: dluble cosh(double x);
程序例:
#include <stdio.h>
#include <math.h>
int main(void)
{
double result;
double x = 0.5;
result = cosh(x);
printf(“The hyperboic cosine of %lf is %lfn”, x, result);
return 0;
}
函數名: country
功 能: 返回與國家有關的信息
用 法: struct COUNTRY *country(int countrycode, struct country *country);
程序例:
#include <dos.h>
#include <stdio.h>
#define USA 0
int main(void)
{
struct COUNTRY country_info;
country(USA, &country_info);
printf(“The currency symbol for the USA is: %sn”,
country_info.co_curr);
return 0;
}
函數名: cprintf
功 能: 送格式化輸出至屏幕
用 法: int cprintf(const char *format[, argument, …]);
程序例:
#include <conio.h>
int main(void)
{
/* clear the screen */
clrscr();
/* create a text window */
window(10, 10, 80, 25);
/* output some text in the window */
cprintf(“Hello worldrn”);
/* wait for a key */
getch();
return 0;
}
函數名: cputs
功 能: 寫字符到屏幕
用 法: void cputs(const char *string);
程序例:
#include <conio.h>
int main(void)
{
/* clear the screen */
clrscr();
/* create a text window */
window(10, 10, 80, 25);
/* output some text in the window */
cputs(“This is within the windowrn”);
/* wait for a key */
getch();
return 0;
}
函數名: _creat creat
功 能: 創建一個新文件或重寫一個已存在的文件
用 法: int creat (const char *filename, int permiss);
程序例:
#include <sysstat.h>
#include <string.h>
#include <fcntl.h>
#include <io.h>
int main(void)
{
int handle;
char buf[11] = “0123456789”;
/* change the default file mode from text to binary */
_fmode = O_BINARY;
/* create a binary file for reading and writing */
handle = creat(“DUMMY.FIL”, S_IREAD | S_IWRITE);
/* write 10 bytes to the file */
write(handle, buf, strlen(buf));
/* close the file */
close(handle);
return 0;
}
函數名: creatnew
功 能: 創建一個新文件
用 法: int creatnew(const char *filename, int attrib);
程序例:
#include <string.h>
#include <stdio.h>
#include <errno.h>
#include <dos.h>
#include <io.h>
int main(void)
{
int handle;
char buf[11] = “0123456789”;
/* attempt to create a file that doesn’t already exist */
handle = creatnew(“DUMMY.FIL”, 0);
if (handle == -1)
printf(“DUMMY.FIL already exists.n”);
else
{
printf(“DUMMY.FIL successfully created.n”);
write(handle, buf, strlen(buf));
close(handle);
}
return 0;
}
函數名: creattemp
功 能: 創建一個新文件或重寫一個已存在的文件
用 法: int creattemp(const char *filename, int attrib);
程序例:
#include <string.h>
#include <stdio.h>
#include <io.h>
int main(void)
{
int handle;
char pathname[128];
strcpy(pathname, “\”);
/* create a unique file in the root directory */
handle = creattemp(pathname, 0);
printf(“%s was the unique file created.n”, pathname);
close(handle);
return 0;
}
函數名: cscanf
功 能: 從控制臺執行格式化輸入
用 法: int cscanf(char *format[,argument, …]);
程序例:
#include <conio.h>
int main(void)
{
char string[80];
/* clear the screen */
clrscr();
/* Prompt the user for input */
cprintf(“Enter a string with no spaces:”);
/* read the input */
cscanf(“%s”, string);
/* display what was read */
cprintf(“rnThe string entered is: %s”, string);
return 0;
}
函數名: ctime
功 能: 把日期和時間轉換為字符串
用 法: char *ctime(const time_t *time);
程序例:
#include <stdio.h>
#include <time.h>
int main(void)
{
time_t t;
time(&t);
printf(“Today’s date and time: %sn”, ctime(&t));
return 0;
}
函數名: ctrlbrk
功 能: 設置Ctrl-Break處理程序
用 法: void ctrlbrk(*fptr)(void);
程序例:
#include <stdio.h>
#include <dos.h>
#define ABORT 0
int c_break(void)
{
printf(“Control-Break pressed. Program aborting …n”);
return (ABORT);
}
int main(void)
{
ctrlbrk(c_break);
for(;;)
{
printf(“Looping… Press <Ctrl-Break> to quit:n”);
}
return 0;
}
