前期準備：Vmware workstaton虛擬機軟件及可用的Centos7系統

1、在虛擬機中新添一塊120G的硬盤，已備分區使用，重啟系統即可進行分區操作。

2、查看系統上是否識別出的新增的硬盤：

[root@centos7 ~]# lsblk

NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT

sda 8:0 0 200G 0 disk

├─sda1 8:1 0 1G 0 part /boot

├─sda2 8:2 0 50G 0 part /

├─sda3 8:3 0 2G 0 part [SWAP]

├─sda4 8:4 0 1K 0 part

└─sda5 8:5 0 10G 0 part /data

sdb 8:16 0 120G 0 disk

sr0 11:0 1 10G 0 rom

3、下面對/dev/sdb硬盤進行分區，硬盤一共120G要求分3個分區，第一個分區為40G，第二個分區為50G，第三個分區為30G：

[root@centos7 ~]# fdisk /dev/sdb

Welcome to fdisk (util-linux 2.23.2).

Changes will remain in memory only, until you decide to write them.

Be careful before using the write command.

Device does not contain a recognized partition table

Building a new DOS disklabel with disk identifier 0x15c20061.

Command (m for help): n

Partition type:

p primary (0 primary, 0 extended, 4 free)

e extended

Select (default p):

Using default response p

Partition number (1-4, default 1):

First sector (2048-251658239, default 2048):

Using default value 2048

Last sector, +sectors or +size{K,M,G} (2048-251658239, default 251658239): +40G

Partition 1 of type Linux and of size 40 GiB is set

Command (m for help): N

Partition type:

p primary (1 primary, 0 extended, 3 free)

e extended

Select (default p):

Using default response p

Partition number (2-4, default 2):

First sector (83888128-251658239, default 83888128):

Using default value 83888128

Last sector, +sectors or +size{K,M,G} (83888128-251658239, default 251658239): +50G

Partition 2 of type Linux and of size 50 GiB is set

Command (m for help): n

Partition type:

p primary (2 primary, 0 extended, 2 free)

e extended

Select (default p):

Using default response p

Partition number (3,4, default 3):

First sector (188745728-251658239, default 188745728):

Using default value 188745728

Last sector, +sectors or +size{K,M,G} (188745728-251658239, default 251658239):

Using default value 251658239

Partition 3 of type Linux and of size 30 GiB is set

Command (m for help): w

The partition table has been altered!

Calling ioctl() to re-read partition table.

Syncing disks.

4、查看分區效果：

[root@centos7 ~]# lsblk

NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT

sda 8:0 0 200G 0 disk

├─sda1 8:1 0 1G 0 part /boot

├─sda2 8:2 0 50G 0 part /

├─sda3 8:3 0 2G 0 part [SWAP]

├─sda4 8:4 0 1K 0 part

└─sda5 8:5 0 10G 0 part /data

sdb 8:16 0 120G 0 disk

├─sdb1 8:17 0 40G 0 part

├─sdb2 8:18 0 50G 0 part

└─sdb3 8:19 0 30G 0 part

sr0 11:0 1 10G 0 rom

5、通知內核讀取更新的分區表：

查看分區表是否更新：

[root@centos7 ~]# partprobe /dev/sdb

[root@centos7 ~]# cat /proc/partitions

major minor #blocks name

8 0 209715200 sda

8 1 1048576 sda1

8 2 52428800 sda2

8 3 2097152 sda3

8 4 1 sda4

8 5 10485760 sda5

8 16 125829120 sdb

8 17 41943040 sdb1

8 18 52428800 sdb2

8 19 31456256 sdb3

11 0 10491904 sr0

成功分區后即可制作文件系統了。

6、對新硬盤分區創建文件系統

新增磁盤分區完成后，開始制作文件系統。對sdb1分區進行制做xfs文件系統為例，以演示創建文件系統，其它分區方法一樣。

[root@centos7 ~]# mkfs.xfs /dev/sdb1

meta-data=/dev/sdb1 isize=512 agcount=4, agsize=2621440 blks

= sectsz=512 attr=2, projid32bit=1

= crc=1 finobt=0, sparse=0

data = bsize=4096 blocks=10485760, imaxpct=25

= sunit=0 swidth=0 blks

naming =version 2 bsize=4096 ascii-ci=0 ftype=1

log =internal log bsize=4096 blocks=5120, version=2

= sectsz=512 sunit=0 blks, lazy-count=1

realtime =none extsz=4096 blocks=0, rtextents=0

查看/dev/sdb1的分區類型：

[root@centos7 ~]# blkid

/dev/sda1: UUID="bfb9c261-33b4-4602-91ea-a71995a8ef96" TYPE="xfs"

/dev/sda2: UUID="4f823650-e522-46fa-9904-c1e7476f89ad" TYPE="xfs"

/dev/sda3: UUID="8cc37a26-d321-4331-a020-05f3a08af552" TYPE="swap"

/dev/sda5: UUID="0f16b61c-d601-4783-8e3d-0a6452aad27d" TYPE="xfs"

/dev/sdb1: UUID="fd61aaf0-bc8e-4da4-8e66-d29d5696b2d5" TYPE="xfs"

/dev/sr0: UUID="2018-11-26-14-22-58-00" LABEL="CentOS 7 x86_64" TYPE="iso9660" PTTYPE="dos"

可見sdb1分區已經創建完成，下面就可以掛載分區后正常使用了。

7、掛載新硬盤分區：掛載/dev/sdb1分區：

創建/dev/sdb1分區的掛載點：

[root@centos7 ~]# mkdir /madedu_data

[root@centos7 ~]# mount /dev/sdb1 /magedu_data

mount: mount point /magedu_data does not exist

[root@centos7 ~]# mount /dev/sdb1 /madedu_data

[root@centos7 ~]# df -h

Filesystem Size Used Avail Use% Mounted on

/dev/sda2 50G 3.9G 47G 8% /

devtmpfs 1.2G 0 1.2G 0% /dev

tmpfs 1.2G 0 1.2G 0% /dev/shm

tmpfs 1.2G 11M 1.2G 1% /run

tmpfs 1.2G 0 1.2G 0% /sys/fs/cgroup

/dev/sda5 10G 33M 10G 1% /data

/dev/sda1 1014M 174M 841M 18% /boot

tmpfs 233M 0 233M 0% /run/user/0

tmpfs 233M 12K 233M 1% /run/user/42

/dev/sdb1 40G 33M 40G 1% /madedu_data

8、配置開機自動掛載

掛載完成后，記住要寫在/etc/fstab配置文件里，使其新增磁盤分區在開機后能自動掛載。

[root@centos7 ~]# vim /etc/fstab

#

/etc/fstab

Created by anaconda on Thu Jan 3 22:00:10 2019

#

Accessible filesystems, by reference, are maintained under '/dev/disk'

See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info

#

UUID=4f823650-e522-46fa-9904-c1e7476f89ad / xfs defaults 0 0

UUID=bfb9c261-33b4-4602-91ea-a71995a8ef96 /boot xfs defaults 0 0

UUID=0f16b61c-d601-4783-8e3d-0a6452aad27d /data xfs defaults 0 0

UUID=8cc37a26-d321-4331-a020-05f3a08af552 swap swap defaults 0 0

/dev/sdb1 /madedu_data xfs

defaults 0 0

將此內容添加其中：/dev/sdb1 /magedu_data xfs defaults 0 0

檢查配置文件的語法：

[root@Magedu ~]# mount -a

執行該命令后，沒有報錯，說明配置文件正確，能開機自動掛載，到此整個新增硬盤、分區、制作文件系統以及自動掛載配置全過程完成結束。